Contact Mobile
3151 S. E. Inner Loop, Suite B
Georgetown, Texas 78626
Taylor Line (512) 352-4176 Ext. #3330
Liberty Hill Line (512) 260-4268 Ext. #3330
Phone: (512) 943-3330
Fax: (512) 943-3335
Driving Directions

J. Terron Evertson, P.E.
Director of Road and Bridge
Email:  Road Administrator
Williamson County, TX
(512) 943-3330
Revised Floodplain Maps Issued by FEMA

The Federal Emergency Management Agency (FEMA) is currently revising floodplain boundaries for portions of Williamson County. FEMA has issued a preliminary Flood Insurance Study (FIS) report for the entire county and incorporated areas, and has also issued preliminary Flood Insurance Rate Map (FIRM) panels for the applicable areas included in recent studies. The revised FIS and FIRM panels become effective December 20, 2019 and replace the previous information.

This update of special flood hazard information includes a comprehensive flood study conducted by the Texas Water Development Board and the Upper Brushy Creek Water Control and Improvement District (WCID) for the Brushy Creek watershed downstream to near Coupland. The update also includes floodplains immediately north and east of this watershed boundary because the existing floodplains are within a FIRM panel already being revised with the watershed study. These preliminary floodplains were released by FEMA on January 30, 2017 with some revisions released September 26, 2017. The FEMA 90-day public comment and appeal period for these preliminary floodplains ended on May 14, 2018. 

FEMA released a second phase of floodplain revisions on March 16, 2018. These ‘San Gabriel Watershed Phase 2’ revisions are scattered throughout the remainder of the San Gabriel River watershed and encompass only existing Zone A floodplains. These Phase 2 floodplain revisions do not include all Zone A floodplains, and also do not include most floodplains recently studied with the City of Georgetown / Texas Water Development Board planning study. The FEMA 90-day public comment and appeal period for these Phase 2 revisions within the unincorporated areas of the county ended November 12, 2018.

FEMA combined both of these study phases and issued a single Letter of Final Determination on June 20, 2019, which finalizes the studies. Again, the revised flood hazard and floodplain information becomes effective December 20, 2019.

The floodplain revisions issued on preliminary FIRM panels are illustrated on the county’s interactive web map located here. This map simply shows the proposed increases and decreases in the 1% annual chance (100-year) storm floodplain boundaries. The 1% annual chance flood results in the commonly used phrase “100-year floodplain”, which is regulated by FEMA and the county through the National Flood Insurance Program (NFIP). The Base Flood Elevation (BFE) is the elevation of the 1% annual chance flood. FEMA studies also determine the 0.2% annual chance flood and resulting floodplain, which is commonly referred to as the “500-year floodplain”.

Additional data on the proposed revisions, including the BFE and the 0.2% annual chance floodplain, can be viewed by following the FEMA web links at the bottom of the ‘Home’ panel for our interactive web map, or by clicking this website link. For more information on this process, please refer to our Frequently Asked Questions page.

What is a Floodplain?

A floodplain is a geographic area subject to flooding and/or land adjacent to a waterway necessary to contain a flood. Floodplains can be associated with rivers, lakes, streams, channels, or even small creeks that are normally dry most of the year. There are two types of floodplains we generally deal with:

   1. 25 year floodplain: an area subject to flooding as a result of the occurrence of a 25 year storm event - a storm that has a 4% chance of occurring in any given year.
   2. 100 year floodplain: an area subject to flooding as a result of the occurrence of a 100 year storm event - a storm that has a 1% chance of occurring in any given year.

See also the Federal Emergency Management Agency (FEMA) web site for more information on floodplains and floodplain management.

Floodplain Regulations in Williamson County
Floodplain regulations are enforced to protect public safety and health. In addition, they encourage sound engineering practices and efficient floodplain management techniques. All construction in Williamson County must adhere to federal floodplain regulations. Regulations are established by the Federal Government and implemented by the  Federal Emergency Management Agency (FEMA). The County Engineer's Office is responsible for examining construction for compliance with local and federal floodplain regulations.
Evaluating and Permitting Floodplains

County Engineer's Office is the designated floodplain administrator for Williamson County. Official floodplain maps for the County are available for viewing in our office at 3151 S.E. Inner Loop, Suite B, Georgetown, TX, 78626. Floodplain permitting within various cities in Williamson County is handled by those cities directly.

Currently, residents may come to the County Engineer's Office for consultation to determine whether any specific location is within the floodplain. Alternatively, FEMA maintains a website (http://msc.fema.gov/portal) where you can view the same maps. Per county ordinance, a Certificate of Compliance is required for all structures or other developments outside of a FEMA-mapped floodplain in unincorporated areas of the county. The Certificate of Compliance verifies that no FEMA-mapped 100 year floodplain exists in the area of proposed development.

Floodplain Development Permit

If your property is in the floodplain, you will need to elevate the structure higher than the base flood elevation. A floodplain permit will be required. To receive a permit, residents must obtain a permit application packet. Included in the packet are instructions and the forms necessary for the floodplain development permit:

    * Floodplain Permit Application
    * Floodplain Development Permit Application Key Elements
    * Elevation Certificate

To complete this process, you must hire a surveyor to certify the elevation of the structure and complete the elevation certificate. Completion of the process qualifies the home for the National Flood Insurance Program (NFIP). Development within the flood way is prohibited except with extensive engineering and flood proofing. The Williamson County Flood Damage Prevention Ordinance contains the full text of regulations.

If you have questions, please contact the County Engineer's Office at (512) 943-3330.

Important Note: As of November 1, 2005, County Engineer's Office stopped issuing the 3-part form entitled the “Williamson County Floodplain Management Program Elevation Certificate” and began asking applicants to have their surveyors or engineers use the “Federal Emergency Management Agency (FEMA) National Flood Insurance Program Elevation Certificate” (FEMA Form No. 81-31) relating to new permit applications.

FEMA Map Service Center and Flood Map Store
Digital versions and images of flood maps are now available for viewing and printing from the on-line FEMA Flood Map Store at: http://msc.fema.gov/. This on-line store provides paper, scanned images on CD-ROM, and downloads of maps. The Flood Map Store allows users to create a FIRMette at no cost. A FIRMette is a section of the flood hazard map at 100% scale that can be printed on standard paper sizes (8.5 x 11, 8.5 x 14, and 11 x 17).